Auto Addict’s Carbon Fiber S550 at SEMA 2026

SEMA week in Vegas never gets old, and one of our favorite cars on the floor this year was parked on the red and black tile at Auto Addict’s Booth #21609 in Central Hall. Auto Addict’s SEMA 2026 Mustang is an S550 GT covered nose to tail in satin carbon fiber, and it rolled in on our Satin Bronze TEN Spun Forged wheels.

A Closer Look at Auto Addict’s SEMA 2026 Mustang

Auto Addict has one of the deepest S550 carbon catalogs around, and this car wears a lot of it. Up front, it gets a GT500 style fascia with canards and a lower splitter, a louvered hood to vent heat off the Coyote, and vented front fenders. Carbon rockers run down both sides into a full carbon rear bumper and diffuser wrapped around the quad tips, with a wing on the decklid. Every surface is finished in a satin clear, so the weave stays readable under the hall lights without the glare you get off gloss carbon.

The fascia, splitter, rockers, and rear bumper match Auto Addict’s S550 Carbon Fiber Track Package, a 13 piece kit for 2018-2023 GT and EcoBoost cars. The structural pieces use a 3K 2×2 twill outer ply, vacuum consolidated and post cured. The A-pillar and quarter panel skins lay over the factory metal, and that’s how the weave runs unbroken from the windshield back to the taillights.

Satin Bronze TEN Spun Forged Wheels on a Carbon S550

Bronze was the right call on this one. A darker wheel would have disappeared into all that carbon, while the Satin Bronze keeps the face of the TEN easy to pick out from across the booth. The open spokes also leave the red Brembos in full view.

Fitment is staggered: 19×10 +35 up front on 275/35R19 and 19×11 +50 out back on 305/35R19. That’s the most common 19 inch pairing in our S550 Mustang wheel fitment guide, and it clears the Performance Pack Brembos without spacers. The extra width and the 305 section in the rear put more rubber under the Coyote, which anyone who’s tried to put an S550 GT’s power down on factory tires will appreciate.

Spun forging works the barrel under heat and pressure, which is how the TEN comes in lighter than a cast wheel. On this setup, the 19×10 +35 front weighs 23.9 lbs and the 19×11 +50 rear weighs 21.1 lbs, so the wider wheel is actually the lighter one.

Auto Addict SEMA 2026 S550 Mustang GT wheel and tire fitment
Position Wheel Size Offset Tire Size
Front 19×10 +35 mm 275/35R19
Rear 19×11 +50 mm 305/35R19

Thank you to the Auto Addict team for bringing this one to SEMA on a set of our TENs, and to everyone who came by Booth #21609 to see it in person. If carbon and bronze is where your own S550 is headed, check out the TEN, see every size we offer in the S550 fitment guide, or browse this car in our vehicle gallery.